
Permanent Magnet Motor Core
In permanent magnet synchronous motors (PMSM) and brushless DC (BLDC) systems, the magnetic circuit must withstand strong reverse magnetic fields, which may trigger irreversible demagnetization. Our permanent magnet motor core adopts proprietary flux-barrier slot design to minimise magnetic flux leakage while achieving high saturation flux density (Bmax>1.75 T). Even under peak-torque and high-temperature working conditions, rare-earth magnets can operate safely within their demagnetization curve.
Product Name: Permanent Magnet Motor Core
Anti-Demagnetization Permanent Magnet Motor Core – Ultra-Low Flux Leakage for High-Speed BLDC & Servo Motors
Quality Policy
Quality first, Customer first, Continuous improvement and Sustainable operation
Product Description
In permanent magnet synchronous motors (PMSM) and brushless DC (BLDC) systems, the magnetic circuit must withstand strong reverse magnetic fields, which may trigger irreversible demagnetization. Our permanent magnet motor core adopts proprietary flux-barrier slot design to minimise magnetic flux leakage while achieving high saturation flux density (Bmax>1.75 T). Even under peak-torque and high-temperature working conditions, rare-earth magnets can operate safely within their demagnetization curve.




Material Science & Thermal Stability
We select high-grade non-grain-oriented silicon steel ranging from 0.20 mm to 0.27 mm, featuring ultra-low core loss ≤3.5 W/kg @1.5 T/50 Hz. Every permanent magnet motor core goes through dedicated stress-relief annealing to stabilise grain structure. It avoids thermal-expansion mismatch between lamination stacks and embedded magnets - a typical failure source leading to long-term magnetic-performance degradation.
Uncompromised Precision for Air-Gap Integrity
Stator-rotor air-gap is one of the most critical parameters for PMSM performance. Manufactured by high-speed progressive dies, strict specifications are guaranteed:
- Inner diameter tolerance: ±0.008 mm (far tighter than general industry standards)
- Burr height: ≤0.02 mm (eliminate micro-short-circuit risks and local hot-spots)
- Stacking factor: >97.5 % to maximise effective magnetic area
- Concentricity: ≤0.015 mm over full stack height
Such high-precision manufacturing delivers uniform and consistent air-gap, effectively lowering torque ripple and improving power density for finished motor assemblies.
Technical FAQ – Addressing PM-Specific Concerns
Q1: How does the core resist irreversible demagnetization caused by high stator current?
A: Integrated magnetic wedges and optimised tooth-tip geometry guide magnetic flux away from magnet edges and weaken counter-acting armature reaction fields. FEA simulation verifies more than 15 % safety margin against demagnetization threshold.
Q2: Is this core suitable for both surface-mounted and interior permanent magnet (IPM) structures?
A: Yes. Flexible slot layouts support both SPM surface-mount and IPM interior-rotor solutions. For IPM rotors, bridge thickness can be adjusted to balance mechanical strength and flux-leakage performance.
Q3: Are these cores available for high-speed operation above 15 000 RPM?
A: Laser welding interlock and high-strength adhesive bonding are applied between laminations. The stack retains structural integrity under heavy centrifugal loads. Our cores have passed 20 000-RPM burst-test without deformation.
Q4: Can you custom-make magnet-insertion pockets or provide pre-assembly service?
A: Magnet pockets can be precision-machined according to your magnet dimensions (tolerance ±0.02 mm). Partial pre-assembly service (stack + adhesive bonding) is available to simplify your downstream production.
Q5: How is magnetic homogeneity ensured for bulk-volume orders?
A: Each batch is sampled and tested via B-H curve analyser and flux-density scanner. Digital material certificates are supplied with every shipment, fully traceable back to raw silicon-steel coils.
Application Scenarios
Our permanent magnet motor core is ideal magnetic-circuit component for:
- EV / HEV automotive traction motors
- High-speed CNC spindle motors
- Robotics & precision servo actuators
- Aerospace actuation and drone propulsion systems
- High-efficiency IE5+ grade HVAC compressor motors
We cooperate with automotive Tier-1 suppliers, aerospace enterprises and motor R&D institutes. Stable magnetic properties and zero-defect dimensional quality are guaranteed from small-batch prototypes (10 units) up to mass-volume production (50 000+ units per month).
Factory Strength & Global Compliance
Certified to IATF 16949:2016 and ISO 14001 environmental-management standard. Fully-automated 600-SPM stamping lines run with real-time SPC process control to meet global manufacturers' reliability requirements. Our engineering team provides free DFM review and FEA simulation validation. Fast prototype turnaround: 7 working-days for existing dies.
Contact our B2B technical-sales team to discuss your magnet-grade requirements and get customised permanent magnet motor core solutions. Our design protects magnets, boosts torque output and gives your motors competitive durability.
Hot Tags: permanent magnet motor core, China permanent magnet motor core manufacturers, suppliers, factory, Brushless Motor Core, Fan Motor Core, Induction Motor Core, iron core, Permanent Magnet Motor Core, Stator Iron Core
Send Inquiry










