Manufacturing Process Of Plastic Injection Molds
Jul 05, 2026
The manufacturing of plastic injection molds begins with product structure and mold design; the mold structure is determined based on the plastic part's dimensions, material properties, aesthetic requirements, and production volume. Once the design is finalized, the mold base, core, cavity, sliders, lifters, and other standard and non-standard components are prepared according to the blueprints. Mold steel is selected based on required precision, service life, and production needs; critical molding components undergo material inspection and necessary heat treatment prior to machining to ensure stability during subsequent processing and operation.
Mold component machining involves processes such as milling, turning, grinding, drilling, wire-cut EDM, and sinker EDM. Cores and cavities are the primary molding components and demand high dimensional accuracy and surface quality; they typically undergo rough machining-leaving a specific machining allowance-followed by finish machining to achieve the precise dimensions specified in the blueprints. Features such as deep grooves, narrow slots, complex geometries, and areas inaccessible to standard cutting tools are machined using wire-cut or sinker EDM, with strict control over machining deformation and dimensional errors.
After component machining, the process moves to the mold assembly stage, where parts are fitted, adjusted, and installed according to assembly drawings. Guide pillars and bushings ensure accurate mold opening and closing movements, while mechanisms like sliders and lifters require repeated checks of clearances to guarantee smooth operation. The assembly process also involves inspecting the fit between the core and cavity, the mating of parting surfaces, the ejection mechanism, and the gating system; any interference, excessive clearance, or poor fit is rectified immediately.
Once assembled, the mold undergoes a trial run (mold testing) involving actual injection molding to evaluate product dimensions, appearance, demolding performance, and molding stability. Based on the trial results, necessary modifications and adjustments are made-such as altering gate dimensions, adjusting venting locations, refining cavity dimensions, or improving the ejection mechanism. After confirming the product meets all requirements, the mold undergoes a final inspection and cleaning, followed by rust prevention, lubrication, and labeling, ensuring it is ready for subsequent mass production.







