Inspection Items For Plastic Injection Molds

Jul 06, 2026

Once the plastic injection mold has been manufactured and assembled, the first step is to inspect its overall dimensions and appearance. Key inspection items include the mold's length, width, height, shut height, mounting dimensions, and the positioning of mounting holes, ensuring compliance with design drawings and the injection molding machine's installation specifications. Simultaneously, the mold surfaces are checked for defects such as dents, rust, or cracks, and the mold base and various components are verified for secure assembly to ensure the mold is ready for proper operation.

 

The core and cavity are critical areas for inspection; their dimensions, shapes, positional accuracy, and surface quality must be verified against product drawings. For precision products, critical dimensions are measured using equipment such as Coordinate Measuring Machines (CMMs) or profile projectors to confirm that machining tolerances meet requirements. The parting line is inspected for proper mating to prevent visible gaps that could cause flash during injection. Molding mechanisms-such as sliders and lifters-are checked for positional accuracy and fit clearances to ensure smooth lateral core-pulling action.

 

Following assembly, the mold's moving mechanisms and auxiliary systems-including guide pillars, guide bushings, sliders, lifters, ejector pins, and return mechanisms-undergo inspection. Manual or machine-assisted operations are used to verify the smoothness of mold opening, closing, and ejection, checking for binding, abnormal noises, or mechanical interference. The cooling system is tested with water flow to ensure clear channels and no leaks; the gating system and venting structures are also inspected to guarantee proper flow of molten plastic into the cavity and effective air evacuation.

 

After assembly inspections, a mold trial is conducted to verify the mold's comprehensive performance through actual injection molding. Key observations focus on product dimensional accuracy, appearance quality, cycle time, and demolding performance, as well as the presence of defects such as sink marks, warpage, burrs, short shots, or weld lines. The mold's stability and temperature rise during continuous operation are also monitored, and necessary modifications or adjustments are made based on the trial results. Only after all inspections meet design and production requirements is the mold approved for mass production, with corresponding inspection and maintenance records established.