Specifications for plastic injection molds
Aug 09, 2026
The specifications for plastic injection molds are primarily determined by product dimensions, structural design, injection molding machine parameters, and production requirements. Common specification parameters include the mold's length, width, and height; mold weight; mold base model; shut height; mold opening stroke; and maximum opening distance. Mold design must account for parameters such as the injection molding machine's platen dimensions, mounting hole locations, and maximum mold thickness to ensure proper installation and operation.
The number of mold cavities is another critical aspect of specification design; the choice between single-cavity and multi-cavity configurations depends on product structure, production volume, and the capabilities of the injection molding machine. Increasing the number of cavities alters the mold's overall dimensions, weight, and the pressure required for injection; consequently, the machine's clamping force and injection capacity must be appropriately matched. For high-volume products, multi-cavity molds are typically employed to meet production efficiency and continuous manufacturing requirements.
Specifications for the molding components-such as the core, cavity, gate, runner, ejection mechanism, and cooling channels-must also be defined. Specific dimensions for the core and cavity require adjustment based on the plastic material's shrinkage rate, with machining tolerances determined in accordance with product drawings. For molds incorporating features like sliders or lifters, parameters such as travel distance, mounting dimensions, and operating clearances must be clearly defined to ensure smooth mold opening and part ejection.
Once mold specifications are established, compatibility with the injection molding machine must be verified, covering parameters such as mounting dimensions, clamping force, shot capacity, maximum and minimum mold thickness, and ejection stroke. Mold specifications vary significantly depending on the product; therefore, selection cannot be based on fixed standard dimensions alone. Actual manufacturing should be guided by product drawings, mold design blueprints, and the technical specifications of the injection molding machine to ensure easy installation, stable operation, and compliance with mass production requirements.







