Maintenance of Plastic Injection Molds

Aug 08, 2026

Plastic injection molds require regular cleaning and inspection during production, particularly regarding the parting surface, core, cavity, venting channels, and ejection mechanism. After production, plastic residues, oil, and dust must be promptly removed from the mold surfaces to prevent debris from entering mating areas. Appropriate tools should be used during cleaning; striking precision components like the core or cavity directly is prohibited to avoid dents or dimensional changes. Molds taken out of service for extended periods should undergo rust-prevention treatment and be stored in a dry, clean environment.

 

Moving parts of the mold require periodic inspection and lubrication, with a focus on the operation of guide pillars, guide bushings, sliders, angle pins, and ejector pins. Any issues such as sluggish movement, abnormal wear, or increased clearances must be addressed promptly. When lubricating, select a lubricant suitable for the mold material and operating environment, and control the quantity applied to prevent oil from entering the cavity and affecting the product's appearance. Springs, screws, and limiting components should also be inspected regularly; any parts found to be loose, deformed, or damaged must be replaced immediately.

 

Cooling water channels are another critical aspect of mold maintenance; after a period of production, check for blockages, leaks, or reduced cooling efficiency. Clean the channels when necessary to minimize the impact of scale and impurities on cooling performance. Simultaneously, inspect components such as water connectors and seals for signs of aging to prevent leaks during production. Address minor rust, scratches, or wear on cavity and core surfaces through cleaning, polishing, or repair as appropriate to prevent the issues from worsening.

 

Daily production routines should include maintaining records of mold usage and maintenance-documenting production cycles, repairs, part replacements, and any anomalies-to facilitate tracking the mold's condition. If severe wear, abnormal product dimensions, or persistent molding defects occur, production must be halted immediately for inspection; continuing production without identifying the root cause is prohibited. Through regular maintenance, timely repairs, and standardized operating procedures, one can minimize mold failures, ensure consistent product dimensions and appearance, and extend the mold's service life.