Physical Properties of Plastic Components for Electric Motors
Aug 13, 2026
Plastic components for electric motors are typically manufactured from engineering plastics or other insulating plastic materials; common examples include motor bobbins, coil formers, terminal blocks, insulating brackets, and protective covers. These materials must possess robust mechanical properties-such as adequate tensile, flexural, and impact strength, as well as hardness-to ensure that parts do not crack or undergo significant deformation during assembly, operation, or when subjected to external forces. As strength and toughness requirements vary depending on the specific application, the appropriate material must be selected based on the component's structural design.
Insulation performance is a critical physical characteristic of motor plastic components. During motor operation, these parts serve to isolate and protect conductive components; consequently, the materials used generally require high insulation resistance and excellent dielectric properties. The components must maintain stable insulation integrity under specified operating voltages and environmental conditions, ensuring that performance does not degrade due to moisture, temperature increases, or long-term aging-factors that could otherwise compromise the motor's normal operation.
Internal motor plastic components also require good heat resistance and dimensional stability. Since motors generate heat during prolonged operation, plastic parts must remain stable within the specified operating temperature range, avoiding significant softening, deformation, or dimensional deviations caused by temperature fluctuations. Components located near heat-generating areas-such as windings or iron cores-demand materials with higher heat-resistance ratings, while also necessitating consideration of material aging under sustained high-temperature conditions.
Depending on the actual operating environment, motor plastic components must also exhibit adequate resistance to moisture, corrosion, and aging. Materials must retain their physical and insulating properties in environments characterized by high humidity, dust, or oil contamination. Certain components may also require flame-retardant properties to mitigate safety risks in the event of electrical equipment malfunctions. Therefore, material selection in manufacturing must comprehensively account for the motor's operating temperature, usage environment, electrical requirements, and structural design.







